Puli Set Test Yamaha GT125
Taut and economical, is now not
difficult to come by in the famous skubek more wasteful than the motor manual
transmission. It can mate get just by replacing a few parts CVT. Here it is a
test pulley sets Yamaha GT125.
Part is used also are bolt on.
Which is composed of the front pulley, a bowl and a double lining. In the
market, there are some products that offer the package. Among others Kawahara,
Scarlet, SRP and so on.
Well, for proofing, try SRP
Taiwanese brand. Come test pulleys set Yamaha GT125. Degree slope so special
pulleys foundation has made 14 degrees. In addition, the bowl is designed
double lining rough textured, making it more bite. Positive effects, the risk
of slippage which can cause engine vibration, can be avoided.
Oh yes, unfortunately, the
package is worth USD 1.25 million. It does not include it’s roller tablets. "If you want better, replace
rollernya with the size of a lighter, can use 8 grams or 9 grams," advises
Freddy A. Gauthier of from Ultraspeed.
To be more subtle difference, we
measure the performance of the standard first Yamaha GT125. To that led to the
garage Sportisi motorcycle Motorsport in Rawamangun, East Jakarta. To use
Dynojet 250i didyno made in America. Having done several times run, gained 7.64
Maximum power hp / 9,500 rpm and a torque of 7.98 Nm at 6,200 rpm.
Then, SRP package is replacing a
part CVT standard part GT125. The result when re didyno, recorded peak power of
8.44 hp at 8,600 rpm rotation alias rose 0.8 hp of the standard. While the
greater torque of 0.66 Nm, which recorded 8.64 nm at 6,850 rpm propeller.
The achievement has been good
considering the rollernya still the standard (10 grams). As well as per its
CVT. After didyno, the motor also try to accelerate tested. So try a little
gas, Wuihh ... lightly!
Fun, it is still kept ngisi power
up to 90 km / h. New deh was starting to run out at the speed of 105 km / h. If
previously, create up to 100 km / h just a little old and weary. Understandably,
the extra weight sizable body weight, 150 kg.
TES
BBM
Before pulley set mounted,
92-octane gasoline consumption, measured 2 liter can cover a distance of 97.8
liters. This means that 1 liter can travel 48.9 km. After CVT set mounted,
motorcycle invited around the city, as measured by the same method, which is
full to full and baseball speed over 65 km / h, the result, only need 1.75
liters Pertamax for a distance of 100.2 km. In other words, translucent fuel
consumption 57.2 km / liter.
